Topics created by Pierre SULPICE

https://transfonter.org/

@joseph-benguira that's perfect thanks a lot 🙂

Hey @pierre-sulpice, you cannot change the html markup for cloudbackend inputs because it's generated, but you can add a separate block of CSS to customize the style 🙂

Hey @pierre-sulpice
please try to republish your whole website and let me know if it fix the issue

@joseph-benguira Great thanks a lot (and sorry for answering that late !)

@pierre-sulpice great news it's now fixed 🙂

@jbenguira Understood thanks a lot I'll give a try this weekend !

@jbenguira Thank you. I am on Apple. I will continue to try to figure out this..but seriously miss the ease of a an export..so much so that I find the limitation frustrating.

I am sure that if I knew it and had it working, it would feel simple and easy. Hence why I asked for a guide, clear tutorial for anyone who doesn't handle all the setups, proper commands, Terminal (in my case), etc.. Anyway, it is what it is now. Thanks.

@joseph-benguira Cool, hit me up when it's done ^^

@wassim That makes a lot of sense thank you very much 🙂

Best regards,

@pierre-sulpice yes, this search only on what is visible on screen, if you need to filter in the whole entries of your DB use the filters.

@wassim Excellent thank you 🙂

@Wassim thanks for you answer.

I agree that the file will be tricky to find but I still try to the basic "even hard to find it shouldn't be public when it's related to security", and it's literally for all ma security checks 😕

I thought about the other solution but I'm trying to develop something very easy to maintain for any developers even with a low formation for my clients, your solution itself is great and easy to use, I don't want to complexify it.

I think the third solution I will retain is to create a proxy route that will take care of this common code then call the adequate resource and return the result.

I think having private code outside of a route but still on AppDrag is the only major feature I miss right now !

I haven't said it in a while: Thanks for AppDrag in general, I'm really having a great time on it 🙂

See you soon,
Best regards,

On dynamic-sized-element yes it is only margin/padding and width (when you define margins on columns)

Then if you want to override AppDrag sizing you can adjust the attributes
margin-resolution-position ex: margin-desktop-top
padding-resolution-position ex: padding-mobile-bottom

And then call AppDrag method on the single element

resizeMarginAndPaddingForElemJS($('yourDiv')[0]);

Hey Pierre,
Yes you can transfer a domain to another appdrag user and this is instant!

just open your domain options and click on "Transfer domain to another user", then indicate the email address of the target user (must already have an account on appdrag)

7853cb9a-fd4a-4419-9574-c451e44b158d-image.png

Can you share a link to support@appdrag.com with the steps to reproduce?

Hey Pierre, please ensure the email sender address configured in your whitelabel settings is validated or else indeed no emails will be sent
Another option is to clear the sender email address field in your whitelabel settings

Et me voilà qui me répond finalement ^^
C'est en fait un problème connu de l'inté de vidéos par un rich text.

Il suffit de chopper le parent de l'iframe et d'appliquer à lui et ses enfants un max-width de 100% et c'est réglé, ça respectera les limites du conteneurs dans lequel il est inséré 😉

En substance en un screen ça fait ça par le Dev Tools :
40f8e40a-dbaa-4103-9951-ea3f71daf96c-image.png

C'est assez spécifique comme problème mais sait-on jamais, ça peut resservir à quelqu'un 😉

Bonne journée

💪 🙏

Great!

Thank you very much 🙏

Have a nice day

Thanks a lot, I should have thought about it, it seems so obvious now.
Worked like a charm.

Best regards,

Hey Pierre

Could you try to select all your sentence with that issue and then click on Tx icon to clean the styles? Then you can reapply your styles and try to translate again

I changed it but I'll update one later to show you 🙂

Thanks for the code, but it seems weird that having two possibilities having the same result is something expected ? For the end user it will always be weird I guess ?
Anyway thanks for the code 🙂

For the TM:
It's an habit I have so when I fast scroll or look a search tool I just have to check for "TM" and everything is coming back automatically ^^", it's usually more pleasant that checking my own posts in my profile and let me see the others in the same time.
If it's bothering you I can totally replace it by [Bug] or something else ofc !

See you,
Best regards,

That's weird I have it often, maybe it's in some cases.

The h1 style is indeed globally configured, it's this "remove custom" button I use to have it back to its normal state.
If you want to call each other for 10s so I show it to you I don't mind, I'm available all day except from noon to 2:30pm

See you soon,
Best regards,

That was so obvious... I don't know why I was going that far.... thanks a lot !

Hey @Daniel-Mulroy

I had a loooot of work but I'm back 😉

Thanks for your answer, I noticed some little issues on this part, I'll make a hug port a little later with everything in it !

Color and size seems ok indeed.

See you soon 🙂

Hello 🙂

Sorry for the late reply.

It came back after our messages, so I think it's actually "available as long as you created at least one project.... since you added this condition". This is mostly why for one project creation it disappeared 😉

edit:
I made over 30 websites (mostly landings) since I'm using AppDrag.
For my needs, I mostly use either my own sections with some code in it, or clean one to make a custom little new sections.
When I create a basic landing, I always have a very custom design to setup, it's way faster to do it by myself 🙂

But I think Steven explained me how to publish a section for myself and find it back so... I think it'll do, I'll check that later 🙂

Anyway, thanks a lot !

Hello,

Aaah thanks that's what I was thinking about.
So, I can assume that all my objects will by default inherit from that pagebuilder-edition class as long as I'm viewing them in the page builder is that it ?
Gonna give a try later in the week, thanks 🙂

Hello,

Sorry for the late reply, it works like a charm, thanks 🙂

See you soon,

Well it's not THAT sensitive indeed, it was more like macros for table names and preprod names and stuff like that to avoid to repeat it and be able to change it easily.
I know the Database and stuff like that are protected but I'm thinking that it's still the bed idea to spread all the accurate name of everything that easily ^^"

Problem with the Env Variables is that they are contained only in the func where I write them, so it's not helping that much for this specific usage.
I don't really like the idea of having an API call "just for that", especially when I'll use it a lot for my tracking system, the goal is more to reduce them 😉

So it's not an ABSOLUTE NEED but it might be very handy to add some genericity in my code.

For now I'll not do it, I'll let you know if I come up with a cool system to do it painlessly 🙂

See you soon,

Oops, I misunderstood!

Hello,
You should put your message in Feature requests as it's not a bug it does what it says.

Before executing the Cloud Function you can do additional code, if you need to call another backend you can code it inside your before code block. If we managed it (I have no example in mind) it would add a lot of complexity.

Second point : It doesn't call the before exec function, yes because it's not going to trigger the API function as the input validation did not work. If you need another validation process you can still disable the input validation and do your own in the before exec and return false if it's not good.

Hey, sure :

function validateEmail(email) { var re = /^(([^<>()[]\\.,;:\s@"]+(\.[^<>()[]\\.,;:\s@"]+)*)|(".+"))@(([[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/; return re.test(email); }

Little temporary hotfix :

JSON.stringify(actionUp).replace(/,/g, '|') to store it JSON.parse(prq_visitor.actions_list.replace(/|/g, ',')) to use it

That's annoying but I have a clean usable CSV, and it's easy to ctrl+H in the JSON column to replace the | by ,

Still waiting for an update for a better way to do it ^^

See you soon,
Best regards,

Hey Pierre,

This must be done in the same transaction, please check this tutorial about it:
https://support.appdrag.com/blog/63-Inserting-a-Row-in-the-Database--Create-New-Row-Id.html?category=13

@Wassim Thanks for the reply !
I think it's not useful enough to ask for the new feature directly, but for exemple I have inscriptions I would like to share dynamically to someone that doesn't have an AppDrag account and it's painful to make him create one in his situation ^^"

The only solution I then have is an open link, but it's kind of sensitive so it's not the best to "open" it.

I can extract them regularly ofc but it's less dynamic all of a sudden ^^"

Thanks for your answer anyway !

That was new to me !
Thanks a lot sorry for bothering you ^^"

Good day,
Best regards

Postmortem, indeed the font file you sent us by email seems corrupted and not readable by our font library 😞

Hello,

Great thanks a lot 🙂

Best regards,